|
Post by achtungpanzer on Jan 3, 2018 14:50:45 GMT
|
|
|
Post by achtungpanzer on Jan 3, 2018 14:57:06 GMT
Here some close ups; New antenna's and footstand, also more integrated machineguns in the wings The tail i had to "customize" to get a bit the hooked shape of a Ta152, so i used the one from the mustang( the one from the fw190 had the wrong shape and was yellow) This part andthe 1x5 tile on the top of the nose machinegun hatch are the only sawed parts in this moc Openable wing machinegun hatches I used the same landing gear trick as my Me 109's; only i turned it 90 degrees to get a frontal slanted look Because of the longer heavy wings the gear is a bit less sturdy as the Me 109's, but when placed softly on the ground the gear stays easily in place
|
|
|
Post by Gramps on Jan 3, 2018 17:17:39 GMT
WOW! Nicely done!
|
|
|
Post by El Caracho on Jan 3, 2018 21:44:13 GMT
Nice work! Judging from the reference pictures, I can see why you definitely needed the Mustang canopy for that MOC. The frontal slanted landing gear looks amazing. And the openable wing machine gun hatches are also a nice touch.
But why did the 1x5 tile on the top of the nose machinegun hatch needed to be sawed?
|
|
binni
New Member
Posts: 20
|
Post by binni on Jan 4, 2018 10:22:06 GMT
Wow, a very nice one! Do you have a Picture showing the whole wingspan from above?
|
|
|
Post by achtungpanzer on Jan 4, 2018 14:03:38 GMT
Here is why i sawed the 1x5 tile; Without there's a too wide gap in between Here is the 1x5 tile to make it flatter and still give it the 2 bulbs of the machinegun hood cover I had to saw it to make it fit
|
|
|
Post by achtungpanzer on Jan 4, 2018 14:08:11 GMT
And here some wingspan pics; Unfortunately i couldn't recreate the exact shape of the wing with the tiles from my inventory.... It can be done, but the you'll need a lot of those long sloped plate tiles Funny thing is that the wing tip parts from the Mustang are ideal for it
|
|