Post by The Hegemon on Apr 26, 2022 1:18:14 GMT
GYG57 Escape
Halo: Infinite (2021)
70 pieces, official count (as shown on product packaging, etc.)
34 pieces, inventoried (includes instruction booklet)
The year listed for the set may reflect the copyright date of the instruction booklet rather then the year that the set was released.
All information offered here is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
The discrepancy between official and actual part-count is likely due to Mega Construx tallying each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.
Special thanks to forum member lokisveil for helping to compile this information!
Halo: Infinite (2021)
70 pieces, official count (as shown on product packaging, etc.)
34 pieces, inventoried (includes instruction booklet)
| QTY | PART # | CODE | COLOR | DESCRIPTION (click for image) |
| 2 | AM80035 | AMC | Flame Red | Body part: Flood Infection Form, tendrils (Halo) |
| 2 | AM16653 | MM | Metallic Dark Gray | Bracket 2 x 2 - 2 x 2 sloped with studs |
| 1 | AS-GYG57-02 | CW | Translucent Lime Green | Brick 1 x 1 round dome with white detail |
| 1 | AM73334 | W | Translucent Clear | Connector 1 x 1 brick, round |
| 1 | AM19900 | JZ | Army Green | Connector: clip, small triple |
| 4 | AM19617 | JZ | Army Green | Connector: pin, long with clip |
| 1 | AM19158 | JZ | Army Green | Connector: pin, small with stud |
| 2 | AM74397 | W | Translucent Clear | Connector: pipe, small with pin |
| 4 | AM18560 | BTN | Dark Sand | Plate 1 x 1 round with hollow stud |
| 2 | AM18560 | JZ | Army Green | Plate 1 x 1 round with hollow stud |
| 2 | AM18560 | WH | Translucent Rich Green | Plate 1 x 1 round with hollow stud |
| 1 | AM74805 | MM | Metallic Dark Gray | Plate 1 x 1 with four handles |
| 3 | AM01140 | APG | Steel Gray | Plate 1 x 1 with horizontal peg |
| 1 | AM75153 | MM | Metallic Dark Gray | Plate 1 x 2 with backswept mudguard, left |
| 1 | AM75154 | MM | Metallic Dark Gray | Plate 1 x 2 with backswept mudguard, right |
| 1 | AM01480 | RL | Rich Green | Plate 2 x 6 |
| 2 | AM16959 | MM | Metallic Dark Gray | Slope brick 25 1 x 4 |
| 1 | AM0948 | MM | Metallic Dark Gray | Tile 2 x 2 |
| 1 | AM79281 | F | Black | Weapon, Firearm: SMG with mounting point for suppressor |
| 1 | AM79605 | F | Black | Weapon, Firearm: UNSC assault rifle |
| 1 | FIG-GYG57-A | MUL | Multicolored | Figure, Halo: UNSC Spartan Anubis with yellow highlights |
| 1 | FIG-GYG57-B | MUL | Multicolored | Figure, Halo: UNSC Spartan Hermes red and white detail |
| 1 | AS-GYG57-01 | AMC | Flame Red | Themed set packaging, UNSC Spartan helmet with reflective visor |
| 1 | AD-GYG57-01 | | Instruction booklet for GYG57 Escape |
The year listed for the set may reflect the copyright date of the instruction booklet rather then the year that the set was released.
All information offered here is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
The discrepancy between official and actual part-count is likely due to Mega Construx tallying each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.
Special thanks to forum member lokisveil for helping to compile this information!