|
Post by El Caracho on Feb 21, 2018 14:01:50 GMT
Just a quick MOC of a Tiger (P), basically created by combining the base of set 2496 "SdKfz 184 Panzerjäger Tiger (Ferdinand)" with the turret of set 2487 "PzKpfw VI Tiger Ausf. E.". After the release of the Ferdinand set, the "Porsche Tiger" was a pretty obvious MOC that had to happen. Normally the upper hull structure should be 2 studs wider, but then it would have been too much of a modification from the original set, and I could have build a body from scratch as well ... but I didn't wanna do that. Oh, and btw, you can still open the 2 hatches in the front ... maybe I should post a detail pic of that "feature". The pictures can also be found in my flickr album for this MOC or in the COBI Small Army WWII Brick Sets flickr group.
|
|
|
Post by El Caracho on Feb 21, 2018 14:03:24 GMT
Here's how I moved the hatches completely to the front, which saves a whole stud of space. And you are still able to open the hatches and fit a minifigure in. So my quick MOC has at least this feature, which is build different than on an off-the-shelves Cobi model Also, the model has an openable engine hatch in the rear:
|
|