Post by The Hegemon on Jun 12, 2021 3:03:36 GMT
GHR82 Battle Bones
Masters of the Universe: Pro Builders (2019)
431 pieces, official count
379 pieces, inventoried (includes instruction booklet)
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
Special thanks to forum member lokisveil for helping to compile this information!
The discrepancy between official and actual part-count is likely due to Mega Construx tallying each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.
Masters of the Universe: Pro Builders (2019)
431 pieces, official count
379 pieces, inventoried (includes instruction booklet)
QTY | PART # | CODE | COLOR | DESCRIPTION (click for image) |
3 | AM16764 | AVS | Flake Copper | Bar 5L with flanged base and rounded top |
1 | AM18259 | AVS | Flake Copper | Bar 8L |
1 | AM18259 | PH | Brick Red | Bar 8L |
6 | AM72384 | SN | Medium Smoke Gray | Body part: horn/tooth on small pin |
37 | AM79425 | SN | Medium Smoke Gray | Body part: horn/tooth, small, on small pin |
15 | AM78275 | SN | Medium Smoke Gray | Brick 1 x 1 ball joint socket, top |
3 | AM72340 | SN | Medium Smoke Gray | Brick 1 x 1 octagonal faceted horn on small pin |
12 | AM73448 | SN | Medium Smoke Gray | Brick 1 x 1 round with horizontal clip beneath |
11 | AM79112 | SN | Medium Smoke Gray | Brick 1 x 1 two-thirds-height w/ medium socket & ball joint |
3 | AM17834 | SN | Medium Smoke Gray | Brick 1 x 2 round top |
5 | AM79227 | SN | Medium Smoke Gray | Brick 1 x 2 two-thirds-height with medium ball joint |
5 | AM79111 | SN | Medium Smoke Gray | Brick 1 x 2 two-thirds-height with medium ball socket on end |
2 | AM17153 | SN | Medium Smoke Gray | Brick 2 x 2 corner |
3 | AM03018 | SN | Medium Smoke Gray | Brick 2 x 2 two-thirds-height, round top & two studs |
3 | AM73414 | SN | Medium Smoke Gray | Brick 2 x 2 with ball joint socket, large |
1 | AM74671 | SN | Medium Smoke Gray | Brick 2 x 2 without left corner |
1 | AM74672 | SN | Medium Smoke Gray | Brick 2 x 2 without right corner |
2 | AM78291 | SN | Medium Smoke Gray | Connector: ball joint on small pin |
2 | AM78296 | SN | Medium Smoke Gray | Connector: ball socket, small on small pin |
12 | AM76060 | SN | Medium Smoke Gray | Connector: pin, small with hand grip |
1 | AM19392 | AVS | Flake Copper | Connector: rod, small, elbow, asymmetrical |
1 | AM19392 | HP | Spanish Blue | Connector: rod, small, elbow, asymmetrical |
1 | AM19392 | PH | Brick Red | Connector: rod, small, elbow, asymmetrical |
3 | AM80524 | BDG | Flake Dark Gray | Connector: rubber stopper (fits in socket of AM73414) |
1 | AX-GCP90-01 | XX | Rich Electric Blue | Connector: string |
1 | AM79208 | PH | Brick Red | Creature, complete: snake, rearing cobra with flared hood |
13 | AM03328 | SN | Medium Smoke Gray | Plate 1 x 1 |
2 | AM78273 | SN | Medium Smoke Gray | Plate 1 x 1 with opposing side studs, descending |
8 | AM79377 | SN | Medium Smoke Gray | Plate 1 x 1 with small ball joint |
16 | AM09393 | SN | Medium Smoke Gray | Plate 1 x 2 |
7 | AM78276 | SN | Medium Smoke Gray | Plate 1 x 2 with ball joint on end, small |
2 | AM79246 | SN | Medium Smoke Gray | Plate 1 x 2 with hollow studs |
3 | AM07590 | SN | Medium Smoke Gray | Plate 1 x 2 with one stud, centered |
8 | AM79563 | SN | Medium Smoke Gray | Plate 1 x 2 with small pin on side |
20 | AM72600 | SN | Medium Smoke Gray | Plate 1 x 3 with hollow studs |
2 | AM74298 | SN | Medium Smoke Gray | Plate 1 x 3 with two studs |
3 | AM09593 | SN | Medium Smoke Gray | Plate 1 x 4 |
2 | AM07475 | SN | Medium Smoke Gray | Plate 1 x 5 |
7 | AM09292 | SN | Medium Smoke Gray | Plate 1 x 6 |
2 | AM18298 | SN | Medium Smoke Gray | Plate 1 x 8 |
2 | AM03773 | SN | Medium Smoke Gray | Plate 2 x 2 |
6 | AM15484 | SN | Medium Smoke Gray | Plate 2 x 2 corner |
1 | AM79018 | MCX | Marigold Orange | Plate 2 x 2 round with descending peg |
1 | AM79017 | MCX | Marigold Orange | Plate 2 x 2 round with small descending socket beneath |
7 | AM18293 | SN | Medium Smoke Gray | Plate 2 x 2 T-shape |
2 | AS-GHR82-01 | SN | Medium Smoke Gray | Plate 2 x 2 with 1 x 1 extensions & vertical loop |
7 | AM03772 | SN | Medium Smoke Gray | Plate 2 x 3 |
3 | AM09493 | SN | Medium Smoke Gray | Plate 2 x 4 |
3 | AM17148 | SN | Medium Smoke Gray | Plate 2 x 5 with cutouts |
4 | AM76357 | AXT | Vertigris Green | Plate 2 x 6 irregular |
1 | AM17055 | SN | Medium Smoke Gray | Plate 4 x 6 |
8 | AM17018 | SN | Medium Smoke Gray | Slope brick 1 x 1 with rear overhang |
2 | AM17128 | SN | Medium Smoke Gray | Slope brick 25 1 x 2 |
1 | AM77199 | SN | Medium Smoke Gray | Slope brick 25 1 x 4 with studs on slope |
11 | AM72002 | SN | Medium Smoke Gray | Slope brick 25 2 x 1 inverse |
7 | AM18223 | SN | Medium Smoke Gray | Slope brick 25 2 x 2 inverse |
2 | AM04429 | F | Black | Slope brick 33 1 x 2 with studs on slope |
1 | AM04429 | SN | Medium Smoke Gray | Slope brick 33 1 x 2 with studs on slope |
1 | AM75508 | SN | Medium Smoke Gray | Slope brick 33 2 x 4 double / 45, left with cutout |
1 | AM75509 | SN | Medium Smoke Gray | Slope brick 33 2 x 4 double / 45, right with cutout |
1 | AM17008 | SN | Medium Smoke Gray | Slope brick 33 3 x 5 double / 45 inverse, left |
1 | AM17007 | SN | Medium Smoke Gray | Slope brick 33 3 x 5 double / 45 inverse, right |
4 | AM17127 | SN | Medium Smoke Gray | Slope brick 36 1 x 1 |
2 | AM72001 | SN | Medium Smoke Gray | Slope brick 36 1 x 1 with open stud on slope |
17 | AM18740 | SN | Medium Smoke Gray | Slope brick 45 1 x 1 with 1 x 1 plate |
4 | AM74060 | SN | Medium Smoke Gray | Slope brick 45 1 x 2 double |
4 | AM16679 | SN | Medium Smoke Gray | Slope brick 45 2 x 1 inverse |
1 | AM17606 | SN | Medium Smoke Gray | Slope brick 45 2 x 4 inverse skewed forward, left |
1 | AM17607 | SN | Medium Smoke Gray | Slope brick 45 2 x 4 inverse skewed forward, right |
1 | AM15481 | SN | Medium Smoke Gray | Slope plate 2 x 1, double-sloping, left |
1 | AM15480 | SN | Medium Smoke Gray | Slope plate 2 x 1, double-sloping, right |
2 | AM022501 | SN | Medium Smoke Gray | Tile 1 x 2 |
4 | AM15555 | SN | Medium Smoke Gray | Tile 1 x 2 curved top |
4 | AM78285 | SN | Medium Smoke Gray | Tile 2 x 2 round dome |
1 | AM79349 | PH | Brick Red | Weapon, Armor: shield, buckler, ornate with pointed boss |
1 | AM80199 | AVS | Flake Copper | Weapon, Armor: shield, buckler, simple, with 8 rivets |
1 | AM79173 | HP | Spanish Blue | Weapon, Armor: shield, studded buckler |
1 | AM79459 | AMC | Flame Red | Weapon, Firearm: pistol, Eternian laser weapon, type 01 |
1 | AM79459 | F | Black | Weapon, Firearm: pistol, Eternian laser weapon, type 01 |
1 | AM80201 | AVS | Flake Copper | Weapon, Firearm: pistol, Eternian laser weapon, type 02 |
1 | AM80196 | AVS | Flake Copper | Weapon, Firearm: rifle, Eternian laser weapon |
1 | AM79763 | ATC | Barbie Pink | Weapon, Melee: axe, great, double headed |
1 | AM79763 | HP | Spanish Blue | Weapon, Melee: axe, great, double headed |
1 | AM80197 | AVS | Flake Copper | Weapon, Melee: axe, head with rear spike and chipped blade |
1 | AM80198 | AVS | Flake Copper | Weapon, Melee: axe, head with rear spike and chipped, wavy blade |
1 | AM79458 | NT | Orange Yellow | Weapon, Melee: Duncan's mace |
1 | AM80195 | AVS | Flake Copper | Weapon, Melee: mace with flanged head and square butt-spike |
1 | AM79838 | AVS | Flake Copper | Weapon, Melee: pike blade with three spikes on rear edge |
1 | AM80200 | AVS | Flake Copper | Weapon, Melee: spear head, jagged with round base |
1 | AM80194 | AVS | Flake Copper | Weapon, Melee: sword, long with narrowed blade at handguard |
1 | AM79172 | ATC | Barbie Pink | Weapon, Melee: sword, The Power Sword, old |
1 | AM79172 | AWU | Metallic Burnt Gold | Weapon, Melee: sword, The Power Sword, old |
1 | AM79172 | HP | Spanish Blue | Weapon, Melee: sword, The Power Sword, old |
1 | AM17002 | SN | Medium Smoke Gray | Windscreen 4 x 1 x 2 rounded double convex |
3 | AM76856 | SN | Medium Smoke Gray | Brick 1 x 2 with 1 x 2 plate extension & large ball joint |
1 | FIG-GHR82-A | | Figure, MOTU: Faker | |
1 | FIG-GHR82-B | | Figure, MOTU: Moss Man (flocked) | |
1 | FIG-GHR82-C | | Figure, MOTU: Man-At-Arms | |
1 | FIG-GHR82-D | | Figure, MOTU: Teela with stylized cobra hood head dress | |
1 | AS-GHR82-02 | | Moss Man scented air freshener | |
1 | AD-GHR82-01 | | Instruction booklet for GHR Battle Bones, 1 of 2 | |
1 | AD-GHR82-02 | | Instruction booklet for GHR Battle Bones, 2 of 2 (addendum) |
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
Special thanks to forum member lokisveil for helping to compile this information!
The discrepancy between official and actual part-count is likely due to Mega Construx tallying each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.