Post by The Hegemon on Jan 30, 2021 4:42:55 GMT
GWJ76 Trap Jaw Laser Cannon
Masters of the Universe: Skeletor Head Mini Sets (2021)
76 pieces, official count
63 pieces, inventoried (includes instruction booklet)
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
The discrepancy between official and actual part-count is likely due to Mega Construx tallyinging each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.
This set was apparently released in 2021, but the instruction booklet shows a copyright date of 2020.
Masters of the Universe: Skeletor Head Mini Sets (2021)
76 pieces, official count
63 pieces, inventoried (includes instruction booklet)
QTY | PART # | CODE | COLOR | DESCRIPTION (click for image) |
2 | AM18287 | APG | Steel Gray | Bar 1 x 1 x 1 with perpendicular handles |
1 | AM78619 | DO | Gray | Bar 3L with perpendicular handles |
2 | AM04428 | DO | Gray | Bracket 1 x 1 - 1 x 1 with stud |
1 | AM16980 | DO | Gray | Brick 1 x 1 with curved top |
2 | AM18286 | APG | Steel Gray | Brick 1 x 1 with studs on adjacent sides |
2 | AM73012 | DO | Gray | Cone 1 x 1 inverse with grip |
2 | AM08412 | DO | Gray | Cone 1 x 1 with open top |
2 | AM17003 | DO | Gray | Connector: pin, small |
2 | AM77583 | DO | Gray | Connector: pin, small cap |
1 | AM76060 | FM | Florida Orange | Connector: pin, small with hand grip |
2 | AM74397 | APG | Steel Gray | Connector: pipe, small with pin |
1 | AM74414 | APG | Steel Gray | Fixture: dish, 2 x 2 on single stud |
2 | AM76058 | DO | Gray | Plate 1 x 1 with horizontal connector pipe, hollow |
2 | AM76054 | APG | Steel Gray | Plate 1 x 1 with horizontal handle |
1 | AM16975 | DO | Gray | Plate 1 x 2 with horizontal clip |
2 | AM76467 | DO | Gray | Plate 1 x 2 with two studs on side, descending |
1 | AM01314 | DO | Gray | Plate 1 x 3 |
2 | AM72600 | FM | Florida Orange | Plate 1 x 3 with hollow studs |
1 | AM79017 | CS | Pastel Yellow | Plate 2 x 2 round with small descending socket |
1 | AM74314 | APG | Steel Gray | Plate 2 x 2 with two horizontal pegs |
1 | AM03772 | FM | Florida Orange | Plate 2 x 3 |
1 | AM09493 | APG | Steel Gray | Plate 2 x 4 |
1 | AM79019 | CS | Pastel Yellow | Plate 2 x 4 with holes through corner studs |
1 | AM01480 | SX | Metallic Byzantium Purple | Plate 2 x 6 |
1 | AM17018 | DO | Gray | Slope brick 1 x 1 with rear overhang |
1 | AM17128 | DO | Gray | Slope brick 25 1 x 2 |
1 | AM18223 | APG | Steel Gray | Slope brick 25 2 x 2 inverse |
3 | AM01322 | FM | Florida Orange | Slope brick 45 1 x 2 |
1 | AM07223 | AXT | Vertigris Green | Tile 1 x 1 |
1 | AM79666 | MD | Midnight Blue | Tile 1 x 1 grill |
1 | AM75332 | BDG | Flake Dark Gray | Tile 1 x 1 round dome, low |
1 | AM19999 | FM | Florida Orange | Tile 1 x 1 with vertical clip on top |
2 | AM022501 | DO | Gray | Tile 1 x 2 |
2 | AM76456 | FM | Florida Orange | Tile 2 x 2 symmetrical wedge |
1 | AS-GWJ76-03 | SX | Metallic Byzantium Purple | Tile 3 x 3 printed with starscape and orbital view of Eternia |
1 | AS-GWJ76-02 | SX | Metallic Byzantium Purple | Tile 3 x 3 printed with starscape and unnamed ringed planet |
1 | AM78599 | DO | Gray | Weapon, Missile: launcher 1 x 1 x 3, friction launcher |
1 | AM78600 | DO | Gray | Weapon, Missile: launcher 1 x 1 x 3, friction launcher, trigger |
2 | AM78601 | ZD | Trans Yellow | Weapon, Missile: small rod with spherical payload |
1 | AM81072 | APG | Steel Gray | Figure, MOTU: Trap Jaw ''Hook'' mechanical arm component |
1 | AM81073 | APG | Steel Gray | Figure, MOTU: Trap Jaw ''Grabber'' mechanical arm component |
1 | AM81074 | APG | Steel Gray | Figure, MOTU: Trap Jaw ''Fly Swat'' mechanical arm component |
1 | FIG-GWJ76-A | MUL | Multicolored | Figure, MOTU: Trap Jaw with ''Lasertron'' mechanical arm |
1 | AM81084 | SX | Metallic Byzantium Purple | Themed set packaging, rear baseplate section of Skeletor head |
1 | AS-GWJ76-01 | MUL | Multicolored | Themed set packaging, pale yellow Skeletor head in purple hood |
1 | AD-GWJ76-01 | | Instruction booklet for GWJ76 Trap Jaw Laser Cannon |
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
The discrepancy between official and actual part-count is likely due to Mega Construx tallyinging each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.
This set was apparently released in 2021, but the instruction booklet shows a copyright date of 2020.