|
|
Post by Gramps on Nov 11, 2018 17:49:08 GMT
|
|
|
|
Post by goodwillhunter on Nov 13, 2018 1:26:02 GMT
I can't be the only one who had this come to mind upon seeing your last cowboy...   |
|
|
|
Post by Gramps on Nov 13, 2018 18:00:58 GMT
I can't be the only one who had this come to mind upon seeing your last cowboy... LOL!!  |
|
|
|
Post by Roebuck on Nov 21, 2018 15:18:02 GMT
Where did you get the hats from?
|
|
|
|
Post by Gramps on Nov 22, 2018 13:06:33 GMT
Where did you get the hats from? The guy on the horse has a hat from a 3 3/4" Indiana Jones and the other one was from cheap Chap Mei figure knock-off. Both required some work with a dremel tool. I'm experimenting now with the hats from the little Kre-O Cityville Invasion guys. |
|
|
|
Post by Roebuck on Nov 22, 2018 23:28:14 GMT
Where did you get the hats from? The guy on the horse has a hat from a 3 3/4" Indiana Jones and the other one was from cheap Chap Mei figure knock-off. Both required some work with a dremel tool. I'm experimenting now with the hats from the little Kre-O Cityville Invasion guys. Ok thanks for the info |
|
|
|
Post by Gramps on Dec 10, 2018 18:28:40 GMT
Updated- got a hat that works better, though not perfect. It is from one of those Block Tech figures that go with Park Ranger sets. Took a fair amount of dremel work. The revolver, though a bit large, bears a decent resemblance tho the Colts used by Josey Wales. They are from some of the Kre-o Cityville figures.  |
|
|
|
Post by LOKACollector on Dec 13, 2018 4:33:43 GMT
If you run across any swoppet style cowboys on eBay, their hats should be perfect. Then again, if you're already dremeling, any 1/32 cowboy hat could work. Just cut, grind down the excess, and dremel out the hole as needed.
|
|
