Post by The Hegemon on Jun 23, 2020 3:38:40 GMT
GLB71 Mark I Prototype Exosuit
Halo (2019)
81 pieces, official count
70 pieces, inventoried (includes instruction booklet)
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
The discrepancy between official and actual part-count is likely due to Mega Construx counting each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.
Halo (2019)
81 pieces, official count
70 pieces, inventoried (includes instruction booklet)
QTY | PART # | CODE | COLOR | DESCRIPTION (click for image) |
1 | AM77445 | APG | Steel Gray | Brick 1 x 1 half-round with vertical pin |
1 | AM0910 | MM | Metallic Dark Gray | Brick 1 x 1 round |
2 | AM78291 | F | Black | Connector: ball socket joint on small pin |
6 | AM78296 | F | Black | Connector: ball socket small on small pin |
2 | AM17003 | APG | Steel Gray | Connector: pin, small |
2 | AM17003 | MM | Metallic Dark Gray | Connector: pin, small |
1 | AM19158 | MM | Metallic Dark Gray | Connector: pin, small with stud |
2 | AM17506 | APG | Steel Gray | Connector: pipe, small 2 studs long |
8 | AM17506 | MM | Metallic Dark Gray | Connector: pipe, small 2 studs long |
1 | AM18256 | MM | Metallic Dark Gray | Connector: pipe, small 3 studs long with side pin |
2 | AM74397 | MM | Metallic Dark Gray | Connector: pipe, small with pin |
2 | AM19063 | APG | Steel Gray | Connector: three pins in triangle pattern, three pins opposite |
1 | AS-GLB71-04 | MM | Metallic Dark Gray | Container: barrel, small drum with hole in base, striped detail |
1 | AM16303 | F | Black | Cylinder 1 x 1 fluted with small hole on top |
1 | AM17010 | F | Black | Engine component: intake turbine 2 x 2 |
2 | AM76558 | MM | Metallic Dark Gray | Plate 1 x 1 round connector: male:male |
1 | AM18560 | APG | Steel Gray | Plate 1 x 1 round with hollow stud |
1 | AM79375 | APG | Steel Gray | Plate 1 x 2 half-round |
1 | AM19660 | APG | Steel Gray | Plate 1 x 2 with vertical clip on side |
2 | AM01314 | MM | Metallic Dark Gray | Plate 1 x 3 |
1 | AM19380 | MM | Metallic Dark Gray | Plate 2 x 2 round Connector: male:male |
1 | AM76357 | MM | Metallic Dark Gray | Plate 2 x 6 irregular |
2 | AM04429 | F | Black | Slope brick 33 1 x 2 with studs on slope |
1 | AM76277 | APG | Steel Gray | Tile 1 x 1 with tail |
2 | AM76277 | WH | Trans Rich Green | Tile 1 x 1 with tail |
1 | AM19999 | F | Black | Tile 1 x 1 with vertical clip on top |
1 | AM79694 | MM | Metallic Dark Gray | Weapon, Armor: Exosuit, Halo, cuirass, back plate |
1 | AS-GLB71-02 | MM | Metallic Dark Gray | Weapon, Armor: Exosuit, Halo, cuirass, chest plate, UNSC |
1 | AM79698 | MM | Metallic Dark Gray | Weapon, Armor: Exosuit, Halo, forearm |
1 | AM79699 | F | Black | Weapon, Armor: Exosuit, Halo, gauntlet |
1 | AS-GLB71-01 | MM | Metallic Dark Gray | Weapon, Armor: Exosuit, Halo, helmet, UNSC Marine |
2 | AM79701 | AXU | Metallic Light Olive Drab Green | Weapon, Armor: Exosuit, Halo, knee protection |
2 | AM79692 | MM | Metallic Dark Gray | Weapon, Armor: Exosuit, Halo, lower leg |
2 | AM79696 | F | Black | Weapon, Armor: Exosuit, Halo, pauldron |
2 | AM79691 | F | Black | Weapon, Armor: Exosuit, Halo, sabaton |
2 | AM79700 | AXU | Metallic Light Olive Drab Green | Weapon, Armor: Exosuit, Halo, supplemental body shielding |
2 | AM79693 | MM | Metallic Dark Gray | Weapon, Armor: Exosuit, Halo, thigh |
2 | AS-GLB71-03 | MM | Metallic Dark Gray | Weapon, Armor: Exosuit, Halo, upper arm, UNSC |
1 | AM79107 | F | Black | Weapon, Firearm: UNSC assault rifle |
1 | FIG-GLB71-A | | No Color Given | Figure, Halo: UNSC Marine, Ghost |
1 | AD-GLB71-01A | | No Color Given | Instruction booklet for GLB71 Mark I Prototype Exosuit |
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
The discrepancy between official and actual part-count is likely due to Mega Construx counting each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.