Post by The Hegemon on Jun 22, 2020 21:44:05 GMT
GLB72 Breacher Exosuit
Halo (2019)
89 pieces, official count
71 pieces, inventoried (includes instruction booklet)
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
The discrepancy between official and actual part-count is likely due to Mega Construx counting each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.
Halo (2019)
89 pieces, official count
71 pieces, inventoried (includes instruction booklet)
QTY | PART # | CODE | COLOR | DESCRIPTION (click for image) |
1 | AM76521 | AWC | Metallic Camo Dark Gray | Bar 4 studs long, slightly rounded ends |
2 | AM04428 | AWC | Metallic Camo Dark Gray | Bracket 1 x 1 - 1 x 1 with stud |
1 | AM74214 | AWC | Metallic Camo Dark Gray | Brick 1 x 1 round grill |
1 | AM79487 | AKM | Flake Dark Red | Brick 1 x 1 round, male:male connector with hole in side |
2 | AM78291 | F | Black | Connector: ball socket joint on small pin |
6 | AM78296 | F | Black | Connector: ball socket small on small pin |
1 | AM17003 | AWC | Metallic Camo Dark Gray | Connector: pin, small |
1 | AM76558 | AWC | Metallic Camo Dark Gray | Plate 1 x 1 round connector: male:male |
1 | AM79590 | AWC | Metallic Camo Dark Gray | Plate 1 x 1 with one stud on side, ascending |
1 | AM78273 | APG | Steel Gray | Plate 1 x 1 with opposing side studs, descending |
2 | AM78273 | AWC | Metallic Camo Dark Gray | Plate 1 x 1 with opposing side studs, descending |
3 | AM72600 | AWC | Metallic Camo Dark Gray | Plate 1 x 3 with hollow studs |
1 | AM09593 | AWC | Metallic Camo Dark Gray | Plate 1 x 4 |
4 | AM03772 | AWC | Metallic Camo Dark Gray | Plate 2 x 3 |
1 | AM76357 | AWC | Metallic Camo Dark Gray | Plate 2 x 6 irregular |
2 | AM74426 | X | Trans Red | Slope brick 25 1 x 2 corner with rounded slope, left |
2 | AM74427 | X | Trans Red | Slope brick 25 1 x 2 corner with rounded slope, right |
2 | AM17129 | APG | Steel Gray | Slope brick 25 1 x 2 corner, left |
2 | AM17129 | X | Trans Red | Slope brick 25 1 x 2 corner, left |
2 | AM17130 | APG | Steel Gray | Slope brick 25 1 x 2 corner, right |
2 | AM17130 | X | Trans Red | Slope brick 25 1 x 2 corner, right |
2 | AM74106 | X | Trans Red | Slope brick 33 2 x 0.67 x 2 curved slope |
3 | AM17127 | AWC | Metallic Camo Dark Gray | Slope brick 36 1 x 1 |
2 | AM17127 | X | Trans Red | Slope brick 36 1 x 1 |
1 | AM19530 | AKM | Flake Dark Red | Slope plate 1 x 1 |
1 | AM76277 | APG | Steel Gray | Tile 1 x 1 with tail |
1 | AM18269 | APG | Steel Gray | Tile 1 x 2 with 1H tail |
2 | AM74103 | AWC | Metallic Camo Dark Gray | Tile 1 x 3 with five vertical trapezoidal projections |
1 | AM79694 | AKM | Flake Dark Red | Weapon, Armor: back plate, Covenant Exosuit |
1 | AS-GLB72-01 | AKM | Flake Dark Red | Weapon, Armor: chest plate, Covenant Exosuit |
2 | AM79698 | AWC | Metallic Camo Dark Gray | Weapon, Armor: forearm, Covenant Exosuit |
2 | AM79699 | AWC | Metallic Camo Dark Gray | Weapon, Armor: gauntlet, Covenant Exosuit |
2 | AS-GLB72-02 | AKM | Flake Dark Red | Weapon, Armor: lower leg, Covenant Exosuit, silver spattering |
2 | AM79696 | AWC | Metallic Camo Dark Gray | Weapon, Armor: pauldron, Covenant Exosuit |
2 | AM79691 | AWC | Metallic Camo Dark Gray | Weapon, Armor: sabaton, Covenant Exosuit |
2 | AM79693 | AWC | Metallic Camo Dark Gray | Weapon, Armor: thigh, Covenant Exosuit |
2 | AM79697 | AKM | Flake Dark Red | Weapon, Armor: upper arm, Covenant Exosuit |
1 | AM18802 | MM | Metallic Dark Gray | Weapon, Firearm: mauler |
1 | FIG-GLB72-A | | No Color Given | Figure, Halo: Covenant Banished Brute |
1 | AD-GLB72-01A | | No Color Given | Instruction booklet for GLB72 Breacher Exosuit |
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
The discrepancy between official and actual part-count is likely due to Mega Construx counting each piece of the figure's body and armor separately. Since these are not itemized with part-numbers in the instructions, they are counted here as a single part.