Post by The Hegemon on Sept 2, 2018 21:01:34 GMT
DPJ86 Incinerator Cyclops
Halo (2016)
157 pieces, official count
145 pieces, inventoried
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.
Halo (2016)
157 pieces, official count
145 pieces, inventoried
QTY | PART # | CODE | COLOR | DESCRIPTION (click for image) |
2 | AM18559 | AWB | Metallic Medium Gray | Bar 1 x 3 paired double curved on small mounting pin |
6 | AM77174 | RH | Metallic Black | Body part: robot finger on hinge clip |
2 | AM77176 | MM | Metallic Dark Gray | Body part: robot forearm with mounting bar for fingers |
2 | AM09106 | MM | Metallic Dark Gray | Bracket 1 x 2 - 2 x 2 with studs |
2 | AM77181 | AVB | Dark Flame Red | Bracket 1 x 4 - 1 x 3 - 1 x 3 with studs |
1 | AM16980 | MM | Metallic Dark Gray | Brick 1 x 1 with curved top |
2 | AM16980 | ZD | Trans Yellow | Brick 1 x 1 with curved top |
1 | AM18286 | MM | Metallic Dark Gray | Brick 1 x 1 with studs on adjacent sides |
6 | AM77177 | MM | Metallic Dark Gray | Brick 1 x 2 two-thirds height male:male with holes at ends |
1 | AM18255 | AVB | Dark Flame Red | Brick 1 x 2 rounded bottom with bands |
2 | AM07658 | MM | Metallic Dark Gray | Brick 1 x 2 with hole |
1 | AM17502 | MM | Metallic Dark Gray | Brick 1 x 2 with side studs |
1 | AM17601 | RH | Metallic Black | Brick 2 x 2.33 x 2 round with cutout |
1 | AM77172 | MM | Metallic Dark Gray | Cockpit with roll cage, Cyclops Mark III |
2 | AM77856 | MM | Metallic Dark Gray | Connector: angled bracket with medium clip and hole at one end |
10 | AM77179 | MM | Metallic Dark Gray | Connector: pin, medium with clip |
8 | AM77178 | MM | Metallic Dark Gray | Connector: pin, medium with medium handle |
2 | AM17003 | RH | Metallic Black | Connector: pin, small |
2 | AM76060 | RH | Metallic Black | Connector: pin, small with hand grip |
2 | AM72090 | MM | Metallic Dark Gray | Connector: pins with double clip |
1 | AX-DPJ86-02 | AMC | Flame Red | Connector: rubber tubing 2.250'' |
1 | AX-DPJ86-01 | AWB | Metallic Medium Gray | Connector: rubber tubing 3.500'' |
1 | AM74089 | AWB | Metallic Medium Gray | Engine component: exhaust pipe on small pegs |
1 | AM73901 | RH | Metallic Black | Engine component: intake duct 3 x 4 with cowl, left |
1 | AM73900 | RH | Metallic Black | Engine component: intake duct 3 x 4 with cowl, right |
1 | AM17010 | AVB | Dark Flame Red | Engine component: intake turbine 2 x 2 |
2 | AM15057 | AWB | Metallic Medium Gray | Hinge panel, small slatted vane on clip |
2 | AM03328 | MM | Metallic Dark Gray | Plate 1 x 1 |
2 | AM74415 | MM | Metallic Dark Gray | Plate 1 x 1 with horizonal clip |
2 | AM01140 | MM | Metallic Dark Gray | Plate 1 x 1 with horizontal peg |
2 | AM73906 | RH | Metallic Black | Plate 1 x 1 with horizontal pegs |
2 | AM09393 | AWB | Metallic Medium Gray | Plate 1 x 2 |
4 | AM09393 | MM | Metallic Dark Gray | Plate 1 x 2 |
2 | AM16954 | MM | Metallic Dark Gray | Plate 1 x 2 with offset handle, type 01 |
2 | AM07590 | RH | Metallic Black | Plate 1 x 2 with one stud, center |
1 | AM01314 | MM | Metallic Dark Gray | Plate 1 x 3 |
2 | AM15484 | MM | Metallic Dark Gray | Plate 2 x 2 corner |
2 | AM18293 | MM | Metallic Dark Gray | Plate 2 x 2 T-shape |
1 | AM77173 | RH | Metallic Black | Plate 2 x 2 with handle, supported by paired 1 x 3 plates |
1 | AM17057 | AVB | Dark Flame Red | Plate 2 x 2 with rounded bottom |
1 | AM03772 | MM | Metallic Dark Gray | Plate 2 x 3 |
2 | AM77180 | MM | Metallic Dark Gray | Plate 2 x 4 with corner cut-outs & single stud at either end |
1 | AM76357 | ANW | Camo Dark Sand | Plate 2 x 6 irregular |
1 | AM17127 | AWB | Metallic Medium Gray | Slope brick 36 1 x 1 |
2 | AM72001 | AWB | Metallic Medium Gray | Slope brick 36 1 x 1 with open stud on slope |
1 | AM18549 | RH | Metallic Black | Slope brick 36 2 x 1 |
2 | AM18272 | AWB | Metallic Medium Gray | Slope brick 36 2 x 1 with open studs on slope |
2 | AM18740 | RH | Metallic Black | Slope brick 45 1 x 1 with 1 x 1 plate |
2 | AM19165 | AVB | Dark Flame Red | Slope brick 45 1 x 2 double |
2 | AM18902 | AVB | Dark Flame Red | Slope panel 45 4 x 4 double, tapered |
2 | AM18902 | MM | Metallic Dark Gray | Slope panel 45 4 x 4 double, tapered |
1 | AM72495 | AWB | Metallic Medium Gray | Slope plate 1 x 2 left |
1 | AM72494 | AWB | Metallic Medium Gray | Slope plate 1 x 2 right |
2 | AM09835 | MM | Metallic Dark Gray | Slope plate 2 x 1 |
8 | AM75332 | AVB | Dark Flame Red | Tile 1 x 1 round dome, low |
2 | AM75332 | RH | Metallic Black | Tile 1 x 1 round dome, low |
4 | AM09198 | RH | Metallic Black | Tile 1 x 2 with lateral notches |
2 | AM09198 | X | Trans Red | Tile 1 x 2 with lateral notches |
1 | AM74299 | AVB | Dark Flame Red | Tile 1 x 2 without corner, left |
1 | AM74300 | AVB | Dark Flame Red | Tile 1 x 2 without corner, right |
2 | AM18543 | MM | Metallic Dark Gray | Tile 2 x 2 without corners |
1 | AM18543 | RH | Metallic Black | Tile 2 x 2 without corners |
1 | AS-DPJ86-01 | MM | Metallic Dark Gray | Weapon, Armor: Cyclops canopy with gold windscreen |
2 | AM73377 | AVB | Dark Flame Red | Weapon, Armor: Cyclops foot, toe, left |
2 | AM73376 | AVB | Dark Flame Red | Weapon, Armor: Cyclops foot, toe, right |
2 | AM77182 | MM | Metallic Dark Gray | Weapon, Armor: Cyclops Mark III shin guard |
1 | AM76354 | AWB | Metallic Medium Gray | Weapon, Firearm: generic small gun with over/under barrel configuration |
1 | AM16614 | F | Black | Weapon, Firearm: NA4 Flamethrower, barrel |
1 | AM16613 | F | Black | Weapon, Firearm: NA4 Flamethrower, chassis |
1 | AM16615 | F | Black | Weapon, Firearm: NA4 Flamethrower, tank |
1 | FIG-DPJ86-A | Figure, Halo: UNSC Pilot, Incinerator Cyclops | ||
1 | AD-DPJ86-02 | Instruction booklet for DPJ86 Incinerator Cyclops |
This information is subject to change and should be considered a good faith ''best guess.''
Hyperlinks leading to the excellent Bricker database are used with permission.